Handlebar - Yamaha 2004 WR250FS Owner's Service Manual

EC5B0000

HANDLEBAR

Extent of removal:
Extent of removal Order
Preparation for removal
1
1 Handlebar removal
Part name
HANDLEBAR REMOVAL
Headlight
1 Hot starter cable
2 Hot starter lever holder
3 Clutch cable
4 Clutch lever holder
5 Engine stop switch
6 Brake master cylinder
7 Start switch
8 Throttle cable cap
9 Throttle cable #2 (pushed)
10 Throttle cable #1 (pulled)
11 Right grip
12 Tube guide
13 Grip cap cover
14 Left grip
15 Handlebar upper holder
16 Handlebar
HANDLEBAR
Q'ty
1 Disconnect at the lever side.
1
1 Disconnect at the lever side.
1 Disconnect the clutch switch lead.
1 Disconnect the engine stop switch lead.
1 Refer to "REMOVAL POINTS".
1 Disconnect the start switch lead.
1
1 Disconnect at the throttle side.
1 Disconnect at the throttle side.
1 Refer to "REMOVAL POINTS".
1
1
1 Refer to "REMOVAL POINTS".
2
1
5 - 40
CHAS
Remarks