Yamaha 2004 WR250FS Owner's Service Manual page 207

AC MAGNETO AND STARTER CLUTCH
1
3
2
1
E 2
3
2
2
1
3
4 - 85
9. Install:
• Washer (rotor)
• Nut (rotor) 1
65 Nm (6.5 m · kg, 47 ft · lb)
Use the sheave holder 2.
NOTE:
Tighten the rotor nut to 65 Nm (6.5 m · kg,
47 ft · lb), loosen and retighten the rotor nut to
65 Nm (6.5 m · kg, 47 ft · lb).
Sheave holder:
YS-1880-A/90890-01701
10. Install:
• Dowel pin
• Gasket [crankcase cover (left)]
• Crankcase cover (left) 1
• Bolt [crankcase cover (left)] 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Bolt [crankcase cover (left)] 3
12 Nm (1.2 m · kg, 8.7 ft · lb)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
11. Install:
• Washer 1
• Torque limiter 2
• Washer 3
NOTE:
Apply the engine oil to the shaft and washers.
ENG
New