Yamaha 2004 WR250FS Owner's Service Manual page 106

REAR SHOCK ABSORBER LOW COMPRESSION
b
1
a
a
b
DAMPING FORCE ADJUSTMENT
EC36c000
REAR SHOCK ABSORBER LOW
COMPRESSION DAMPING FORCE
ADJUSTMENT
1. Adjust:
Stiffer a → Increase the low compres-
Softer b → Decrease the low compres-
Fully turned in
position
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position. (Which align the punch mark a on
the adjuster with the punch mark b on the
high compression damping adjuster.)
* For AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
3 - 41
• Low compression damping force
By turning the adjuster 1.
sion damping force. (Turn the adjuster
1 in.)
sion damping force. (Turn the adjuster
1 out.)
Extent of adjustment:
Maximum
20 clicks out
(from maximum
position)
Standard position:
About 10 clicks out
* About 9 clicks out
INSP
ADJ
Minimum