Toyota 2008 Corolla Owner's Manual page 280

High beam
(inside)
Low beam
(outside)
2. Turn the bulb base counterclockwise
to the front of the vehicle as shown.
282
'08 Corolla_U (L/O 0706)
3. Unplug the connector.
If the connector is tight, wiggle it.
4. Install a new bulb and connector
into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2008 COROLLA from Aug. '07 Prod. (OM12B28U)