Tilt Steering Wheel - Toyota 2003 Tundra Owner's Manual

If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" in this section.)
For the installation details, refer to the
instruction manual equipped with each
product.
CAUTION
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
D
After securing the child restraint
system, never slide or recline the
seat.
D
Do not install a child restraint sys-
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. This can cause death or
serious injury to the child and front
passenger in case of sudden brak-
ing or a collision.
86
'03 TUNDRA_U (L/O 0301)

Tilt steering wheel

To change the steering wheel angle,
hold the steering wheel, pull the lock
release lever toward you, tilt the steer-
ing wheel to the desired angle and re-
lease the lever.
When the steering wheel is in a low posi-
tion, it will spring up as you release the
lock release lever.
CAUTION
D
Do not adjust the steering wheel
while the vehicle is moving. Doing
so may cause the driver to mishan-
dle the vehicle and an accident may
occur resulting in death or serious
injuries.
D
After adjusting the steering wheel,
try moving it up and down to make
sure it is locked in position.
2003 TUNDRA from Jan. '03 Prod. (OM34421U)