Toyota 2003 Tundra Owner's Manual page 80

TO USE THE ANCHOR BRACKET:
Outside position
1. Remove the head restraint.
80
'03 TUNDRA_U (L/O 0301)
Routing device
2. Route the top strap through the
routing device as shown in the il-
lustration.
CAUTION
Make sure the top strap
twisted.
3. Fix the child restraint system with
the seat belt.
Latch the hook onto
bracket on the side floor and tighten
the top strap.
For instructions to install the child re-
is not
straint system, see "Child restraint" in this
section.
2003 TUNDRA from Jan. '03 Prod. (OM34421U)
the anchor