Toyota 2003 Tundra Owner's Manual page 82

2. Route the top strap through the slot
on top of the seat, pass the strap
through the seat, then latch the hook
onto the anchor bracket.
Close the cover and return the cup
holder to the original position.
82
'03 TUNDRA_U (L/O 0301)
3. Move the child restraint system to
the correct position.
Then fix the child restraint system
with the seat belt and tighten the
top strap.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
—Installation with child
restraint lower anchorages
(standard cab models)
Non–split bench seat
Split bench seat
2003 TUNDRA from Jan. '03 Prod. (OM34421U)