Jump-Starting Procedure - Jeep 2013 Grand Cherokee SRT8 Owner's Manual

Hide thumbs Also See for 2013 Grand Cherokee SRT8:
Table of Contents

Advertisement

532 WHAT TO DO IN EMERGENCIES
3. Remove the protective cover over the remote posi-
tive (+) battery post. Pull upward on the cover to
remove it.
4. If using another vehicle to jump-start the battery, park
the vehicle within the jumper cables reach, set the
parking brake and make sure the ignition is OFF.
WARNING!
Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

Jump-Starting Procedure

WARNING!
Failure to follow this procedure could result in per-
sonal injury or property damage due to battery ex-
plosion.
CAUTION!
Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.
1. Connect the positive (+) end of the jumper cable to the
remote positive (+) post of the discharged vehicle.
2. Connect the opposite end of the positive (+) jumper
cable to the positive (+) post of the booster battery.

Advertisement

Table of Contents
loading

Table of Contents