Jeep 2013 Grand Cherokee SRT8 Owner's Manual page 405

12. Disc Changer Status – When the source for either
Channel 1 or Channel 2 is a multi-disc changer, the
disc loaded / selected status is displayed.
Mode Selection Menu
Mode Selection Menu
UNDERSTANDING YOUR INSTRUMENT PANEL 403
The first press of the MODE button causes the Mode
Selection menu to appear on screen. The current mode is
always the default selection. The mode can be changed
for either Channel/Screen 1 or Channel/Screen 2 using
the remote control.
Use the remote control's navigation buttons ( , , , )
to navigate through the available modes, and then press
the remote control's ENTER button to select the mode.
An alternate method of changing modes is repeated
pressing of the MODE button until the desired mode is
highlighted then press the ENTER button on the remote
control to select the mode.
In a single screen system, when a video mode (such as
DVD-video, Aux video, etc.) is active and Channel/
Screen 1 is selected using the remote control selector
switch, the first press of the remote control's MODE
button causes the Mode Selection menu to appear.
4