Helmet Holder; Adjusting The Front Fork - Yamaha 2008 WR250XX Owner's Manual

1
2
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1
1. Helmet holder
2. Open.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-13
EAU14281

Adjusting the front fork

This front fork is equipped with rebound
damping force adjusting screws and
compression damping force adjusting
screws.
2
WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Rebound damping force
(a)
(b)
1
EWA10160
1. Rebound damping force adjusting screw
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting screw on each
fork leg in direction (a). To decrease the
EAU45200
EWA10180
2
3
4
5
6
7
8
9