Handlebar Switches - Yamaha 2008 WR250XX Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
tripmeter to zero by pushing the
"RESET" button for at least two
seconds.
1 Resetting the distance-compensation
tripmeter in combination with the stop-
watch
2
1. Stop the stopwatch.
2. Reset the distance-compensation
3
tripmeter and the stopwatch to
zero by pushing the "RESET" but-
ton for at least two seconds.
4
Self-diagnosis device
5
This model is equipped with a self-diag-
nosis device for various electrical cir-
6
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
7
on, and then the display will indicate a
two-digit error code.
8
If the display indicates any error codes,
note the code number, and then have a
9
Yamaha dealer check the vehicle.
1
1. Error code display
CAUTION:
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
3-8

Handlebar switches

Left
ECA11590
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch "
EAU12347
1
2
3
/ "
/ "
"