Indicator And Warning Lights - Yamaha 2008 WR250XX Owner's Manual

Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
fore turning the key to "OFF" or
"LOCK".
1
2
3
4
5
6
7
8
9

Indicator and warning lights

1
2
6
5
1. Coolant temperature warning light "
2. Fuel level warning light "
"
3. Neutral indicator light "
"
4. Turn signal indicator light "
5. High beam indicator light "
6. Engine trouble warning light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
3-2
EAU11003
transmission is in the neutral position.
3 4
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
2.1 L (0.55 US gal) (0.46 Imp.gal).
"
When this occurs, refuel as soon as
possible.
The electrical circuit of the warning light
"
can be checked by turning the key to
"
"ON".
If the warning light does not come on
"
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
EAU11020
"
cuit.
Coolant temperature warning light
"
"
This warning light comes on when the
EAU11060
"
engine overheats. When this occurs,
stop the engine immediately and allow
EAU11080
"
EAU11350
EAU11440

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 wr250x

Table of Contents