Resetting the System to Factory Conditions
Follow the steps below to reset the TracPhone system to its original
factory configuration.
Resetting the system clears all RF radiation hazard zones. The
antenna will be able to transmit in any direction until you
reprogram the hazard zones into the antenna.
1. Press
"CONFIGURATION."
2. Press
3. Press
RESET."
CAUTION
MENUS until the display shows
CONFIGURATION
NEXT MENU
ACCEPT.
BRIGHTNESS= HIGH
NEXT ITEM
MENUS until the display shows "FACTORY
FACTORY RESET= NO
NEXT ITEM
TracPhone V7 User's Guide
Chapter 3 - Configuration
ACCEPT
CHANGE
CHANGE
33