KVH Industries TracPhone V7 User Manual page 29

TracPhone V7 User's Guide
Chapter 3 - Configuration
26
7. Press CHANGE. A cursor appears under the first
number in the displayed azimuth range for RF
radiation hazard zone #1.
ZONE 1= 000-000
CHANGE
8. Press CHANGE until the number is set to the first
digit of the beginning azimuth for zone #1. If the azimuth
value is less than 100º, set the first digit to zero.
9. Press ACCEPT. The cursor moves to the next number.
ZONE 1= 300-000
CHANGE
10. Repeat steps 8 and 9 to set the remaining digits of the
range of azimuths for zone #1. Once you have set the
entire range, the cursor disappears from the display.
ZONE 1= 335-025?
CHANGE
11. Press ACCEPT. The display shows the current
azimuth range for RF radiation hazard zone #2.
ZONE 2= 000-000
NEXT ITEM
ACCEPT
ACCEPT
ACCEPT
CHANGE