Message Configuration; Sending A Test Message; Viewing Email Alert Status - HP 501 Configuration And Administration Manual

Password
Specify the password associated with the username configured in the previous field. The
password can be 1 to 64 characters long and can include any printable characters.

Message configuration

To address 1/2/3
Configure the first email address to which alert messages are sent and, optionally, a second
and third email address. The address must be in email address format, for example
abc@def.com. By default, no addresses are configured.
Email subject
Specify the text to be displayed in the subject of the email alert message. The subject can
contain up to 255 alphanumeric characters. The default is Log message from WCB.

Sending a test message

To validate the configured email server credentials, click Test Mail.
The following text shows an example of an email alert sent from the HP 501 to the network
administrator:
From: AP-192.168.1.1@mailserver.com
Sent: Wednesday, February 08, 2012 11:16 AM
To: administrator@mailserver.com
Subject: log message from AP
TIME
Feb 8 03:48:25
Feb 8 03:48:26

Viewing email alert status

You can select Status > Email alert to view the status of the email alert feature and
information about past activity.
Email alert status
Indicates whether the Email alert feature is administratively enabled or disabled.
Number of emails sent
The number of alert emails sent since the feature was enabled.
Number of emails failed
The number of alert emails sent since the feature was enabled that did not reach the intended
destination.
Time since last email sent
The date and time of the last alert email sent.
54 Tools
Priority Process Id
info login[1457]
info mini_http-ssl[1175]
Message
root login on 'ttyp0'
Max concurrent connections
of 20 reached