Display; Touchscreen - Panasonic CF-U1 Series Operating Instructions Manual

Display

The cursor can not
be displayed at the
right position.

Touchscreen

The cursor does not
work.
Cannot input using
the touchscreen.
Cannot point the
correct position
using the included
stylus.
When using application software displaying a unique
cursor (i.e. Paint), note the following restrictions.
The cursor unique for the application software is not
enlarged.
The cursor unique for the application software may
not be displayed at the right position. Confi rm the op-
eration position using the Windows cursor (enlarged
cursor when zoomed).
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Press (Windows) and press
to select [Restart] and press
Press (Windows),
If the computer does not respond to keyboard com-
mands, read "No response." (
Set [Touchscreen Mode] to [Auto] or [Tablet] in the
[Main] menu of the Setup Utility.
Perform the touchscreen calibration (
two times, and press
(Enter).
and to select [Restart].
page 46).
page 28).
45