Micron Ulva+ Instruction Manual page 16

2. It is essential to clean the sprayer and tank thoroughly after use. Never immerse
the spray head in water or under a tap, since this will destroy the electric motor.
If using water-based mixtures a water and detergent mix should be put in the tank,
swilled around, and then sprayed out onto the treated area or an area of waste
ground. If using ULV formulations use kerosene (do not use water and
detergent) for cleaning out the sprayer. The sprayer and tank (but not the
atomiser disc) should be wiped down externally using a cloth. Periodically
remove the atomiser disc and clean with a soft brush, especially if wettable
powders have been used since these can build up on the atomiser disc and cause
poor performance.
3. After working with agrochemicals, or handling spraying equipment, always
thoroughly wash hands and exposed skin. All protective clothing should be
washed and stored separately from other clothing. Contaminated gloves should
be washed inside out.
14