Integra DTR-50.6 Advanced Manual page 47

Tuner
Setting Item Default Value
AM/FM Frequency 10kHz/200kHz
Step
(North American
models)
AM Frequency Step 9kHz
(Australian and Asian
models)
Setting Details
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
When this setting is changed, all radio
presets are deleted.
Default values vary depending on the
regions.
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
When this setting is changed, all radio
presets are deleted.
Default values vary depending on the
regions.
HDMI
Setting Item Default Value
HDMI CEC (RIHD) Off
Advanced Settings
Setting Details
Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
Depending on the TV set, a link may need to
be configured on the TV.
This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
Setting to "On" and closing the on-screen
menu displays the name of the CEC-
compatible components and "RIHD On" on
the display.
Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
If you operate the Master Volume control of
the unit when this setting is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output
also from the speakers connected to the
unit. If you want to output from only either
of them, change the unit or TV settings, or
reduce the volume of the unit.
If abnormal operation occurs when you set
the setting to "On", set it to "Off".
When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
When changing this setting, turn off and
then on again the power of all connected
components.
47