Power Cords - HP D6000 Installation Instructions Manual

HP BladeSystem Deployment Guide for Solutions with 6Gb SAS BL Switches
•
and External SAS Storage Enclosures

Power cords

The power cord should be approved for use in your country. The power cord must be
rated for the product and for the voltage and current marked on the electrical ratings
label of the product. The voltage and current rating for the cord should be greater
than the voltage and current rating marked on the product. In addition, the diameter
of the wire must be a minimum of 1.00 mm or 18 AWG. The maximum length may
be up to 3.66 m (12 ft).