Using The Infinity With 3 Deluxe Temperature Controllers - Rinnai infinity 32 Operation Manual

OPERATION WITH DELUXE TEMPERATURE CONTROLLERS

Using the Infinity with 3 Deluxe Temperature Controllers

When 3 Temperature Controllers are used for the Infinity 32, they must be one MC-70-1A
(Kitchen) model and two BC-70-1A models (Bathroom and Ensuite).
C
AM
Transfer
0 0 0 0 Hot water
temp.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
MC -70 -1A
Switching the System On
The hot water system and three controllers can be switched on and off from any controller by
pressing the Ô ON/OFFÕ button as shown. When the system is turned on, the monitors will be lit.
During normal operation the system is left on.
C
AM
Transfer
0 0 0 0
Hot water
temp.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
MC -70 -1A
Setting the clock
See page 21 for details on setting the clock.
Setting the Sound Volume
See page 22 for details on setting the sound volume.
Using Hot Water
The hot water delivery temperature can be controlled from either the Kitchen Controller (MC-70-1A)
or Bathroom Controllers (BC-70-1A). See pages 22 to 23 for details on setting the hot water delivery
temperature for the Kitchen and Bathroom Controllers.
Bath Fill Function
See pages 23 to 25 for details on the bath fill function. With two Bathroom Controllers fitted (one in
each bathroom) only one bath can be filled at a time.
NEVER LEAVE YOUNG CHILDREN UNATTENDED IN THE BATH.
When using the Ô Bath fillÕ function, ALWAYS close the hot water tap for the bath after the
bath has filled and flow has stopped.
CAUTION
Repeat the relevant procedures above for the third (Bathroom) controller.
Bath temp.
ON/OFF
C
Water Vol.
Bath Fill Transfer
C Sound
Vol.
Hot water temp.
BC - 70 - 1A
Bath temp.
ON/OFF
C
Water Vol.
Bath Fill Transfer
C Sound
Vol.
Hot water temp.
BC - 70 - 1A
- 27 -
Bath temp.
ON/OFF
C
Water Vol.
Bath Fill
Transfer
C
Sound
Vol.
Hot water temp.
BC - 70 - 1A
Bath temp.
ON/OFF
C
Water Vol.
Bath Fill Transfer
C Sound
Vol.
Hot water temp.
BC - 70 - 1A