Rinnai infinity 32 Operation Manual page 14

OPERATION WITH STANDARD TEMPERATURE CONTROLLERS
The Transfer button on the Bathroom Controller enables you to select and lock the preferred
temperature for shower or bath water. When locked in, this selected temperature cannot be overridden
by any other controller.
To transfer priority of water temperature
selection to the Bathroom Controller, simply
press the TRANSFER button on the Bathroom
Controller.
The ON indicator on the Bathroom Controller
will glow to indicate that priority of water
temperature selection has been transferred to
the Bathroom Controller.
The water temperature can now be selected using the Bathroom
Controller. The maximum temperature which can be selected at
the Bathroom Controller is 50°C (whilst there is no water
running). This is to help reduce the risk of burns from hot water.
A different temperature can be stored in the system memory of
the Bathroom and Kitchen Controllers.
To transfer priority of water temperature
selection back to the Kitchen Controller,
simply press the TRANSFER button
again.
The temperature displayed will then
return to the temperature which was
previously selected at the Kitchen
Controller, or 50°C, whichever is
lower.
The ON indicator on the Kitchen
Controller will glow to indicate priority
control of water temperature selection.
Priority temperature selection cannot be transferred when a hot water tap is open.
NOTE
- 13 -