Notes On Use Of Front Panel; Detaching The Front Panel; Attaching The Front Panel - Rampage ACD-27 Owner's Manual And Installation Manual

NOTES ON USE OF FRONT PANEL

1. Make sure the front panel is right-side-
up when attaching it to the chass is
as it cannot be attached when up-side
down.
2. Do not press very hard on the front panel
when attaching it to the chassis. No
more than light to moderate pressure
should be needed.
3. When attaching the front panel, make
sure the right side is correctly engaged
before pressing the left side to lock it
into position.
4. When taking the front panel with you,
please use the supplied carrying case
to protect the panel from dirt and dam-
age. Make sure there is no dust or dirt
on the electrical terminals on the back
of the panel as this could cause in-
termittent operation or other malfunc-
tions.
1. Turn the vehicle ignition and radio on (radio frequency or disc track number will be shown
on the display panel).
2. Momentarily press the Time/Frequency (T/F) button
press and hold the T/F button until the time display flashes.
3. While the display is flashing, press the Up Tuning button (+
the A or P indication, and the Down Tuning button (
correct time.
4. When the correct time is shown on the display panel, press and release the T/F button
(or wait 5 seconds) for the display to return to the normal indication.

DETACHING THE FRONT PANEL

ATTACHING THE FRONT PANEL

SET SET SETT T T T T ING THE CLOCK SET SET ING THE CLOCK ING THE CLOCK ING THE CLOCK ING THE CLOCK
Release Button
Engage right
side first
co
to display the time of day. Then
) to adjust the hours and
-) to adjust the minutes to the
11 11 11 11 11
128-6691
11 of 16