Detaching The Front Panel; Attaching The Front Panel - Rampage 1285780E Owner's Manual

NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when
attaching it to the chassis as it cannot be
attached when up-side down.
2. Do not press very hard on the front panel when
attaching it to the chassis. No more than light
to moderate pressure should be needed.
3. When attaching the front panel, make sure the
right side is correctly engaged before pressing
the left side to lock it into position.
4. When taking the front panel with you, please
use the supplied carrying case to protect the
panel from dirt and damage. Make sure there
is no dust or dirt on the electrical terminals on
the back of the panel as this could cause
intermittent operation or other malfunctions.
NOTES ON USE OF REMOTE INPUT JACK
The remote input jack provides the user option of
applying an external audio source to the radio.
The audio jack is compatible with most "Walkman"
CD and cassette players, or an MP3 digital audio
playback unit. When the external source is
connected, only that media is played by the radio;
no other input sources (radio or CD) are operative.
1. T
urn the vehicle ignition and radio "on"
2.
Press the Time/Frequency Selector button
3.
While the time is being displayed, press the Time /Frequency Selector button
Manual Down Tuning button (
the minutes to the correct time.
4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and normal
9 9 9 9 9
operation can resume.

DETACHING THE FRONT PANEL

ATTACHING THE FRONT PANEL

SET SETT T T T T ING THE CLOCK SET ING THE CLOCK ING THE CLOCK
SET SET ING THE CLOCK ING THE CLOCK
.
co
to display the time.
-) to adjust the hours or the Manual Up Tuning button (+
Release Button
Engage right
side first
co
together with the
) to adjust
128-5780E
10 of 48