Specifications - Rampage ACD-27 Owner's Manual And Installation Manual

SPECIFICATIONS

SPECIFICATIONS
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
Size:
Operating Voltage:
Output Power:
Output Wiring:
Output Impedance:
Low-Level Output:
Tuning Range:
Sensitivity:
FM Stereo Separation:
CD Frequency Response: 20 - 20,000 Hz. +0 / -3 dB
CD Signal/Noise Ratio:
CD Channel Separation: 1kHz Limit: 50 dB, 10kHz Limit: 40 dB
CD Distortion:
*Specifications are subject to change without notice.
CD-R AND CD-RW PLAYBACK CAPABILITY
This model can play most CD-R and CD-RW media that contains audio programs.
Playback of both CD-R and CD-RW depends on the conditions of the recording equipment
and the CD-R or CD-RW disc quality. In some cases, a CD-R or CD-RW disc cannot be played
on this unit.
12 12 12 12 12
7" W x 2" H x 6-5/16" D
178 mm x 50 mm x 163 mm
12 volts DC, negative ground
160 watts maximum
(40 watts x 4 channels)
Floating-ground type designed for 4 speaker use.
Front and rear channels CANNOT be combined (bridged)
for use with 2 speakers.
RCA low-level outputs (rear channels).
Compatible with 4 ohm speakers.
0.8 volt (800 mv, 600mV Limit)
AM: 530 - 1,710 kHz. (10 kHz. step)
FM: 87.5 - 107.9 MHz. (200 kHz. step)
4.0 uV
25 dB
55 dB
0.2%
128-6691
12 of 16