Specifications - LG PESC0RV0 Installation Manual

Introduction
The CO2 sensor is especially designed to work in conjunction with LG Energy Recovery Ventilators (ERVs). Real-time CO2 levels are detect-
ed and displayed on the sensor's LCD. The CO2 sensor then sends the data to the LG ERV via the hard-wired connection cable coupled with
the supplied 33-foot extension cable. LG ERVs, using stand-alone embedded logic, will respond to CO2 changes in the surrounding ambient
air by applying demand control ventilation when its fan is set to Auto mode. Energy efficiency is increased, and indoor air quality can be
improved when ventilation air is introduced to the monitored space only as necessary.
The CO2 sensor does not work with interlock or slave operation with indoor units.
Factory-Supplied Parts
Figure 1: CO2 Sensor (Model No. PES-C0RV0).
6-inch Hard-Wired
Connection Cable
CO2 Sensor

Specifications

Table 2: Specifications Table.
Specifications
For Use With ARVU053-063ZEA2 and ARVU093-123ZFA2 LG Energy Recovery Ventilators (ERV)
Power Supply
Analog Output
Measuring Range
Dimensions
Net Weight
Shipping Weight
INtRODUCtION, PaRtS LISt, aND
LCD
Yellow
LED
12V DC ±5%
0 to 5V DC
0 to 2,000 ppm
4-1/16" H x 3-1/4" W x 1-1/4" D
4 oz. (CO2 Sensor with its 6-inch Hard-Wired Cable Only)
Approximately 1 lb.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
SPECIFICatIONS
Table 1: Factory-Supplied Parts Table.
Part Quantity
33-foot Extension
One (1)
Cable
Mounting Screws Three (3)
Installation Manual One (1)
Image
5