SaFEty PRECaUtIONS
OPERatION
DANGER
Do not provide power to or operate the sensor if it is flooded
or submerged. always have the dealer or an authorized tech-
nician to service the sensor.
There is risk of fire, electric shock, physical injury or death.
Do not install the CO2 sensor (or its hard-wired and exten-
sion cables) in a location exposed to open flame or extreme
heat. Do not touch the sensor with wet hands.
There is risk of fire, electric shock, physical injury or death.
CAUTION
Only authorized persons should operate the product.
If the sensor is not operated properly, there is a risk of physical injury.
Do not the sensor to get wet.
There is risk of unit failure or malfunction.
Only authorized persons should operate the CO2 sensor.
There is risk of unit failure or malfunction.
4
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Do not store or use flammable gas or combustibles near the
sensor.
There is risk of fire, explosion, and physical injury or death.
Do not modify or extend the power supply cord.
There is risk of fire, electric shock, physical injury or death.
Do not drop the CO2 sensor.
There is risk of unit failure or malfunction.
Need help?
Do you have a question about the PESC0RV0 and is the answer not in the manual?
Questions and answers