Dell Latitude E6540 Owner's Manual page 55

Option
Table 4. Video
Option
LCD Brightness
Table 5. Security
Option
Admin Password
System Password
Internal HDD-0 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
Description
Allows you to set the panel brightness when the ambient sensor is Off.
Description
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard
drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system
password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to sets, change or delete the password on the system's internal hard
disk drive (HDD). Successful changes to this password take effect immediately.
Any change to this option will require a system reboot when you exit setup.
Default Setting: Not set
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
You can define the length of your password. Min = 4 , Max = 32
Allows you to enable or disable the permission to bypass the System and the
Internal HDD password, when they are set. The options are:
• Disabled (Default Setting)
• Reboot bypass
Allows you to enable the disable permission to the System and Hard Drive
passwords when the admin password is set.
Allow Non-Admin Password Changes (Default Setting)
Allows you to determine whether changes to setup option are permitted when an
administrator password is set. The option is disabled by default.
Description
You can select if you want to enable or
disable media card. The options are:
• Enable Media Card (Default Setting)
• Disable Media Card
55