Sony PVM-A170 Operating Instructions Manual page 25

[Mono]
Press the button to display a monochrome picture.
When the buttons is pressed again, the monitor switches
automatically to color mode.
[Blue Only]
Press the button to eliminate the red and green signals.
Only blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
"chroma" and "phase" adjustments and observation of
signal noise.
[Scan]
Press the button to change the scan size of the picture.
With every press of the button, the picture switches in
the sequence [Normal] scan or [Native] scan. (see "Scan
mode image" (page 26)).
[Aspect]
Press the button to set the aspect ratio of the picture,
[16:9] or [4:3].
[2048 Shift]
Press the button to display the hidden left and right parts
exceeding the H size (1920) of the panel when the input
signal system is 2048 × 1080 in the native scan mode. To
slide images and display the hidden parts in the left and
right sides, turn the menu selection control.
The menu selection control can slide images
to display the hidden parts.
[Flip H]
[Flip V]
[Flip H/V]
Press the button to display the reversed image. [Flip H],
[Flip V] and [Flip H/V] can be assigned to each function
button.
Normal display
[Flip V]
Note
When the reverse function is enabled, the following
functions turn off.
 [Wipe]
 [Side by Side]
 [Blending]
[Difference]

[Auto SDI Switch]

[WFM/ALM/Vector]

 [Closed Caption]
 [Time Code]
 [Anamorphic]
[Brightness]
Press the button to display the adjustment screen and
adjust the picture brightness. Press again to hide the
adjustment screen. However, the picture brightness
remains adjustable. Turn the menu selection control
right to increase the brightness, or left to decrease it.
[Contrast]
Press the button to display the adjustment screen and
adjust the picture contrast. Press again to hide the
adjustment screen. However, the picture contrast
remains adjustable. Turn the menu selection control
right to increase the contrast, or left to decrease it.
[Chroma]
Press the button to display the adjustment screen and
adjust the color intensity. Press again to hide the
adjustment screen. However, the color intensity remains
adjustable. Turn the menu selection control right to
increase the intensity, or left to decrease it.
[Flip H]
[Flip H/V]
25
Adjustment Using the Menus