Tools & Materials Required; Power Supply Locations - GE ZGU36L4DYSS Installation Instructions Manual

Table of Contents

Advertisement

• Saw
Tools &
• Measuring tape
Materials
• Carpenter's square
• Pipe and fittings as required.
Required:
• Manual gas line shut-off valve.
• Gas pressure regulator (supplied)
• Large flat-blade screwdriver
• Pipe wrench
Gas Supply:
Power
• The natural gas models are designed to
Supply
• The liquid propane models are designed to
Locations
• These gas cooktops are supplied with 1/2"
• A minimum 5/8" dia. metal flexible line is
• For rigid connection, locate the pipe stub
• Install a manual shut-off valve in the gas line,
Electric Supply:
These cooktops must be supplied with 120
volt, 60 Hz., and connected to a individual,
properly grounded branch circuit protected
by a 15 amp circuit breaker or time delay fuse.
The power cord of this appliance is equipped
with a three-prong (grounding) plug which
mates with a standard three-prong grounding
wall receptacle to minimize the possibility of
shock hazard from this appliance.
If the electrical service provided does not
meet the above specifications, it is recom-
mended that a licensed electrician install an
approved outlet.
DO NOT UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN EXTENSION CORD WITH
THIS APPLIANCE.
operate at 6" to 14" water column pressure.
operate at 11" to 14" water column pressure.
A regulator is required at the L.P. source to
provide a maximum of 14" water pressure to
the range regulator.
NPT female gas connection located at the
left rear corner.
required.
–Use 5-foot long 5/8" flexible metal tubing.
within area shown.
in an easily accessible location.
Installation Preparation
Professional Gas Cooktops
• Gas-resistant pipe joint sealant
• 5 foot, 5/8" AGA-certified flexible metal gas
supply line.
–If required by local codes, use solid pipe
fittings.
Note: Purchase new flexible line. DO NOT
USE OLD, PREVIOUSLY USED FLEXIBLE
LINE.
7" for 36" Models
17" for 48" Models
2"
Locate Gas Supply 2" Maximum
Protrusion From Wall or on Floor 2" From Wall
• Locate the electric supply within the area
shown or within reach of the cooktop's six
foot power cord.
• To avoid tangling cord with items stored in
the cabinet, locate the receptacle on rear
wall, inside the cabinet.
Receptacle Box Cover Plate
Three Prong Plug
Three Prong Receptacle
Gas Line
to Cooktop
16"
6

Advertisement

Table of Contents
loading

Table of Contents