Table of Contents
Advertisement
1
Use a hand-truck to move this cooktop.
S tep
Before moving the cooktop indoors:
• Remove outer carton and packing.
Remove
• Remove the straps holding the cooktop to the
skid.
Packaging
• Remove the grates and drawers below the
knobs.
• Remove grill and/or griddle covers. DO NOT
ATTEMPT TO REMOVE A GRILL OR
GRIDDLE ASSEMBLY.
2
Step
Cut the
Countertop
Opening
48" wide models are designed to fit in 48" or wider base cabinets
Measure carefully when cutting the countertop.
Make sure sides of the opening are parallel.
• These cooktops requires 8" free space below the
countertop.
• Cooktops are designed to hang from the
countertop from its side flanges.
• Smooth any rough edges on the countertop
before installing the cooktop.
–Formica countertop edges must be finished.
The countertop must be strong enough to
support the weight of the cooktop.
• Support cleats can be secured to cabinet sides.
OR
• Build a support deck or box inside the cabinet
which will support the weight of the cooktop.
–Build the support box using a solid material,
cut a 5" x 5" square in the left rear corner for
the gas inlet and power cord clearances.
47-7/8"
26-5/8"
8-7/16"
22-3/4"
46-1/8"
Installation
Professional Gas Cooktops
• Flatten the carton and use a piece as a pad
on the bottom and back of the hand-truck.
Lift the cooktop onto the hand-truck
standing on its end, with the bottom of the
cooktop resting against the back of the
hand-truck.
Move the cooktop indoors:
If door and passageways into the installation
location are less than 30" wide, remove the
cooktop knobs.
7/8"
34-7/8"
2-1/2"
8"
36" wide models are designed to fit in 36" or wider base cabinets
Adjacent Cabinet
and Countertop
26-5/8"
8-7/16"
22-3/4"
1/2"
2-1/2"
8"
Counter Sunk
Screws
7
Advertisement
Table of Contents
