JBL Cinema SB350 Quick Start Manual page 7

Hide thumbs Also See for Cinema SB350:

JBL CINEMA

Quick Start Guide

Guide de démarrage rapide

Stereo / Harman Display Surround

Remote learning feature

The soundbar has the ability to learn the volume control and power infrared (IR) codes of your

IR TV remote control.

To program the soundbar to respond to your TV remote control:

1. Press and hold the top panel 'Surround' key until the system enters learning mode

(the LED will blink orange).

2. VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV

remote control.

3. VOLUME − : Press 'Volume –' on the soundbar and then press 'Volume –' on the TV

remote control.

4. MUTE: Press 'Volume +' and 'Volume –' together on the soundbar and then press

'Mute' on the TV remote control.

5. POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and

then pressing the 'Power' key on the TV remote control.

Note: After each TV IR code is programmed, the blinking orange LED will turn white for

1 second. The soundbar is ready to learn the next key after the white LED disappears

and the orange LED begins to blink.

Press and hold the top panel 'Surround' key again to exit learning mode (the orange

LED will stop blinking).

SB350

Stereo mode

Harman Display

Surround

LED

behavior