Ferroli DIVAtop F 24 Instructions For Use, Installation And Maintenance page 9

DIVAtop F 24
Compensation curve and curve offset
Press the button (detail 10 - fig. 1) once to display the actual compensation curve (fig. 12), which can be modified
with the DHW buttons (details 1 and 2 - fig. 1).
Adjust the required curve from 1 to 10 according to the characteristic (fig. 14).
By setting the curve to 0, sliding temperature adjustment is disabled.
fig. 12 - Compensation curve
Press the heating buttons (details 3 and 4 - fig. 1) to access parallel curve offset (fig. 15), modifiable with the
DHW buttons (details 1 and 2 - fig. 1).
fig. 13 - Parallel curve shift
Press the button (detail 10 - fig. 1) again to exit parallel curve adjustment mode.
9
EN
cod. 3540E821 - 11/2008 (Rev. 00)