Ferroli DIVAtop F 24 Instructions For Use, Installation And Maintenance page 23

DIVAtop F 24
Combustion analysis
Two sampling points have been included at the top of the boiler, one for fumes and the other for air. To take samples:
1. Open the air/fume outlet plug;
2. Insert the probes as far as the stop;
3. Check that the safety valve is connected to a drain funnel;
4. Turn on TEST mode;
5. Wait 10 minutes for the boiler to stabilize;
6. Take the measurement.
1 = Fumes
2 = Air
EN
1
2
fig. 29 - Fume analysis
cod. 3540E821 - 11/2008 (Rev. 00)
23