Table of Contents
Advertisement
INSTALLER AND OWNER GUIDE
What are the three switches for?
Switch 1 =
Switch 2 =
Switch 3 =
RESOLVING PROBLEMS AND CLEANING
Important Safety.
Before undertaking maintenance or replacing the lamp always disconnect the
stove from the electricity supply by removing the 3 pin plug and allowing the
stove to cool.
How do I Clean my stove?
The stove and plastic parts need only to be wiped clean with a dry soft cloth, do not
use polishes or abrasive materials.
I have a problem with my stove!
1. My stove is on but there is no light / low light.
This is possibly a lamp failure. Remove the lamp as in the following section and
check it in a table lamp that is known to work. If it does not work in the table lamp
then it needs replacing as in the following section.
The lamp fitted to this stove is a 60Watt B22, 230Volt clear bayonet lamp. Due to the
indeterminate life span and ease of replacement, they are specifically excluded from
the guarantee.
©
Baxi Heating U.K. Limited 2007.
Main On - Off. (In the 'ON' position, only the flame
effect operates)
1kW fan heat setting and flame effect. (Switch 1 needs
to be in the 'ON' position to enable switch 2 to operate).
2kW fan heat setting and flame effect. (Switch 2 needs
to be in the 'ON' position to enable switch 3 to operate).
Page 8
Advertisement
Table of Contents
