Table of Contents
Advertisement
Quick Links
INSTALLER AND OWNER GUIDE
Model 860
Ashdown
COAL EFFECT ELECTRIC STOVE
WITH REMOTE CONTROL
(GC No. EF-032-27)
This guide is intended to help you
install and care for your Valor Fires
electric stove. Please read carefully
before installing and using your stove.
However, if further information is
required, our
Valor Fires Technical Helpline
will be pleased to help.
Telephone 08706 061 065
(National call rates apply in the United
Kingdom)
In the Republic of Ireland
Telephone 0044 8706 061 065
Important: Please keep your guide in a safe place for future reference
©
Baxi Heating U.K. Limited 2007.
Richmond
&
5122091/02
Advertisement
Table of Contents
Related Manuals for Valor Fires 860
Summary of Contents for Valor Fires 860
- Page 1 COAL EFFECT ELECTRIC STOVE WITH REMOTE CONTROL (GC No. EF-032-27) This guide is intended to help you install and care for your Valor Fires electric stove. Please read carefully before installing and using your stove. However, if further information is...
-
Page 2: Customer Care
CUSTOMER CARE Thank you for choosing Valor Fires All Valor Fires stoves are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new Valor... -
Page 3: Handling And Unpacking
INSTALLER AND OWNER GUIDE Safety First. Valor Fires stoves are CE Approved and designed to meet the appropriate British Standards and Safety Marks. HANDLING AND UNPACKING Before continuing any further with the installation of this stove please read the following: Important instructions. -
Page 4: Positioning The Stove
Always use a fireguard when young children and infirm persons can come into contact with the stove. Always use genuine Valor Fires spares. Never Never leave children unsupervised in a room where the stove is ON and unguarded. - Page 5 INSTALLER AND OWNER GUIDE Figure 1. Side clearances The heating element is mounted on the underside of the heater. It is important that the air supply to the heating element is not obstructed in any way. The heater can be placed on smooth, flat surfaces.
- Page 6 The electric supply must be safely routed from the stove to an electrical socket. If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor Fires authorised service agent, or similarly qualified person (See page 12-14). All external wiring between the stove and the electrical supply shall comply with current IEE regulations.
-
Page 7: Fitting The Doors
INSTALLER AND OWNER GUIDE Fitting the doors. The stove is supplied with the doors removed in order to prevent damage during transportation. Stand the stove on its legs. Unpack the doors and hinge pins. Fit the doors one at a time. To do this locate each door over the stove hinge and secure in place by firmly pushing a hinge pin into each door hinge (See figure Fitting the loose coal. -
Page 8: Operating The Stove
INSTALLER AND OWNER GUIDE OPERATING THE STOVE Never cover the stove or obstruct the opening at the base of the stove, this could cause overheating and consequent risk of fire. The appliance can be controlled by the manual control located on the left hand side of the heater outlet or by using the remote control handset. -
Page 9: Remote Control
INSTALLER AND OWNER GUIDE Remote Control What do the buttons control? Press red ‘ON’ button. To activate the remote handset it is necessary to press the red ON button. Press effect button. Pressing and holding the button in will vary the brightness of the flame effect. The brightness of the flame effect will always return to preset level when the heater has been switched off. -
Page 10: Manual Control
INSTALLER AND OWNER GUIDE Manual Control What does the button control? Press button once. This turns the flame effect on and turns the status lamp green. The flame effect will come on at half its available brightness. Pressing and holding the button in will vary the brightness of the flame effect. The brightness of the flame effect will always return to preset level when the heater has been switched off. -
Page 11: Important Safety
INSTALLER AND OWNER GUIDE RESOLVING PROBLEMS AND CLEANING Important Safety. Before undertaking maintenance or replacing the lamp always disconnect the stove from the electricity supply by removing the 3 pin plug and allowing the stove to cool. How do I Clean my stove? The stove and plastic parts need only to be wiped clean with a dry soft cloth, do not use polishes or abrasive materials. - Page 12 5. I Have a problem that is different to those in the previous examples 1- 4. Below is a list of Useful Telephone numbers For general advice about your stove: VALOR FIRES TECHNICAL HELPLINE 08706 061 065. To report faults or arrange for your stove to be serviced: VALOR FIRES SERVICE 08706 090 081.
-
Page 13: Warranty And Service
INSTALLER AND OWNER GUIDE WARRANTY AND SERVICE To be completed by the customer: Model Serial number (Can be found on the information label - See figure 7) A LABEL CONTAINING THE SERIAL NUMBER MAY HAVE BEEN PLACED INSIDE THIS BOX. Fascia name (Block Capitals) Fascia code - Can be found on information plate (Block Capitals) A LABEL CONTAINING THE FASCIA... - Page 14 INSTALLER AND OWNER GUIDE Brand (Please tick) Baxi Valor Wonderfire Other......Date of Installation Standard Warranty Terms & Conditions The warranty is for 12 months subject to contract. In the United Kingdom servicing can be carried out either by a heateam service engineer or a CORGI registered installer.
- Page 15 INSTALLER AND OWNER GUIDE When calling heateam, it would be helpful if you could have the following information to hand:- Stove serial number Stove make and model number Date of installation Proof of purchase (If you do not have the stove serial number) Note;...
Need help?
Do you have a question about the 860 and is the answer not in the manual?
Questions and answers