Page 1
& COAL EFFECT ELECTRIC STOVE (GC No. EF-032-27) This guide is intended to help you install and care for your Valor Fires electric stove. Please read carefully before installing and using your stove. However, if further information is required, our Valor Fires Technical Helpline will be pleased to help.
CUSTOMER CARE Thank you for choosing Valor Fires All Valor Fires stoves are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new...
INSTALLER AND OWNER GUIDE Safety First. Valor Fires stoves are CE Approved and designed to meet the appropriate British Standards and Safety Marks. HANDLING AND UNPACKING Before continuing any further with the installation of this stove please read the following: Important instructions.
Always use a fireguard when young children and infirm persons can come into contact with the stove. Always use genuine Valor Fires spares. Never Never leave children unsupervised in a room where the stove is ON and unguarded.
Page 5
INSTALLER AND OWNER GUIDE Figure 1. Side clearances The heating element is mounted on the underside of the stove. It is important that the air supply to the heating element is not obstructed in any way. The stove can be placed on smooth, flat surfaces.
Page 6
INSTALLER AND OWNER GUIDE Important Electrical Safety The stove must not be located in front of or under an electrical socket, the socket must always be accessible in order to disconnect the stove from the electrical supply for maintenance and cleaning. Important! This stove must be earthed.
INSTALLER AND OWNER GUIDE Fitting the door. The stove is supplied with the door removed in order to prevent damage during transportation. Stand the stove on its legs. Unpack the door and hinge pins. Locate the door over the stove hinges and secure in place by firmly pushing a hinge pin into each hinge (See figure 3).
Page 8
INSTALLER AND OWNER GUIDE What are the three switches for? Switch 1 = Main On - Off. (In the ‘ON’ position, only the flame effect operates) Switch 2 = 1kW fan heat setting and flame effect. (Switch 1 needs to be in the ‘ON’ position to enable switch 2 to operate). Switch 3 = 2kW fan heat setting and flame effect.
Page 9
4. I Have a problem that is different to those in the previous examples 1- 4. Below is a list of Useful Telephone numbers For general advice about your stove: VALOR FIRES TECHNICAL HELPLINE 08706 061 065. To report faults or arrange for your stove to be serviced: VALOR FIRES SERVICE 08706 090 081.
INSTALLER AND OWNER GUIDE For spares inquiries Spare parts are available nationwide via the ‘interpart stockist network’. For your local stockist consult Yellow pages under ‘Central Heating’. When ordering spare parts please have the below information available. This will help us to deal with your call quicker and avoid you having to make a second call.
Page 11
INSTALLER AND OWNER GUIDE When calling heateam, it would be helpful if you could have the following information to hand:- Stove serial number Stove make and model number Date of installation Proof of purchase (If you do not have the stove serial number) Note;...
Page 15
INSTALLER AND OWNER GUIDE To be completed by the customer: Model Serial number (Can be found on the information label - See figure 5) A LABEL CONTAINING THE SERIAL NUMBER MAY HAVE BEEN PLACED INSIDE THIS BOX. Fascia name (Block Capitals) Fascia code - Can be found on information label (Block Capitals) A LABEL CONTAINING THE FASCIA CODE MAY HAVE BEEN PLACED...