Table of Contents
Advertisement
INSTALLER AND OWNER GUIDE
Important Electrical Safety
The stove must not be located in front of or under an electrical socket, the socket
must always be accessible in order to disconnect the stove from the electrical supply
for maintenance and cleaning.
Important! This stove must be earthed.
The stove is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm² 3
!
core cable.
The wires in the cable are coloured in accordance with the following code: -
!
The electric supply must be safely routed from the stove to an electrical socket.
!
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor
Fires authorised service agent, or similarly qualified person (See page 9). All external
wiring between the stove and the electrical supply shall comply with current IEE
regulations. Extension leads should not be used.
Fitting the legs.
The stove is supplied with the four legs removed in order to prevent damage during
transportation. Each leg has raised lugs that locate into holes in the base of the stove
(See figure 2). Locate the legs and secure in place using the screws supplied.
©
Baxi Heating U.K. Limited 2007.
Live =Brown
Neutral = Blue
Earth = Green /Yellow
Page 6
Figure 2. Fitting the feet
Advertisement
Table of Contents
