Positioning The Stove; Do I Need Any Tools - Valor Fires 860 vienna Installer And Owner Manual

Coal effect electric stove
Hide thumbs Also See for 860 vienna:
Table of Contents

Advertisement

INSTALLER AND OWNER GUIDE
Always
Always install the stove in accordance with this guide. If in doubt obtain
!
expert advice.
Always make sure the electrical socket is accessible and located adjacent to, but
!
not above or behind the stove.
Always disconnect the stove from the electrical supply before carrying out
!
cleaning, maintenance or replacing the lamp.
Always use a fireguard when young children and infirm persons can come into
!
contact with the stove.
Always use genuine Valor Fires spares.
!
Never
Never leave children unsupervised in a room where the stove is ON and
!
unguarded.
Never obstruct or cover the fan outlet or force items into stove openings.
!
Never install or use the stove anywhere where water is in use, i.e.
!
Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.
Never use aerosols or steam cleaners on or around the stove.
!
Never route the electric cable under carpet etc.
!
Never install the stove close to curtains or combustible materials.
!
Never use the stove to dry clothes etc.
!
Never sit or stand on the stove.
!
Please read this guide thoroughly before positioning the stove.

Do I need any tools?

A Philips or cross head screwdriver is required when fitting the legs to the stove.
Where can I position the stove?
The stove is designed to be free standing on a hard level surface. When positioning
please bear the following points in mind:
If you are placing the stove in an alcove, make sure that there is a gap of 150mm
!
to side walls from the sides of the stove. This will ensure good air circulation (See
figure 1).
©
Baxi Heating U.K. Limited 2007.
SAFETY

POSITIONING THE STOVE

Page 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

860 chester

Table of Contents