INSTALLER AND OWNER GUIDE
Fitting the door.
The stove is supplied with the door removed in order
to prevent damage during transportation. Stand the
stove on its legs. Unpack the door and hinge pins.
Locate the door over the stove hinges and secure in
place by firmly pushing a hinge pin into each hinge
(See figure 3).
Fitting the loose coal.
We recommend that the floor is protected with a
!
suitable covering to prevent staining or discolouration
by the coals.
Open the pack of loose coal and position the coal
!
on top and in front of the plastic fuel bed. Arrange the
coal to your liking. It is not necessary to use all of the
coal.
Please fill in the details on pages 15.
Important Safety
Never cover the stove or obstruct the opening at the base of the stove, this
could cause overheating and consequent risk of fire.
The appliance can be operated and controlled using the manual controls located on
the left hand side of the stove outlet.
Stove Controls
Figure 4. Stove controls
©
Baxi Heating U.K. Limited 2007.
OPERATING THE STOVE
Page 7
Figure 3. Fitting the door