Bushnell 119432CW Instruction Manual page 12

Menu Item
Duty
(this sets the
"Overwrite"
feature)
When you've finished using the Setup Menu, and are ready to return the
camera to normal operating mode, so it will begin to capture photos or
videos for you, simply press the Setup button. After you exit the Setup
Menu, the display will go blank and the camera is in "sleep" mode. About
30 seconds later, the camera will begin taking photos or videos when
triggered, at intervals determined by the trigger delay time setting.
12
Settings
(Bold=default)
Y/N
(NOTE: setting to "Y"
not recommended
when using SD cards
of 16GB or higher
capacity)
Description
Press DOWN after Format to
select "Duty". Setting window
reads "OVR". Press OK. Select
"Y" (Yes) if you want the oldest
photos/videos to be replaced by
new images once the SD card is
full. Select "N" (No), and recording
will stop when the card is full.
Press OK.