Setup Menu Reference Table - Bushnell 119432CW Instruction Manual

The following table lists all of the menu items, their available settings,
and a description of their functions:
Menu Item
Date
Time
Delay
10
Settings
(Bold=default)
set year, month,
and day
set hour and
minute
set minutes (0-
10) or seconds
(5-59)
Default delay
time= 5 sec.
Description
Press OK and use the UP/DOWN
keys to change the year setting,
then press OK again and repeat
these steps to also set the current
month and day. Press OK after
setting the day to go to the next
menu item (setting Time).
Press OK and use the UP/DOWN
keys (to change the setting) then
OK again ( to move to the next
field) to set the current hour (24-
hr format only, "00"=midnight,
"12"=noon) and minute.
Selects the length of time that
the camera will "wait" until it
responds to any additional
triggers from the PIR after an
animal is first detected and
remains within the sensor's
range. During this user set
"ignore triggers" interval, the
camera will not capture photos/
videos. This prevents the card
from filling up with too many
redundant images. Settings
begin with 10 second default
time. Press OK, set the delay time
in minutes (if desired), press OK
and set the delay in seconds.