Parrot CK3100 Series Installation Manual page 7

EXPERT TEPEE
1
Unclip the DIAG socket and pull
it out from behind, towards the
top of the panel under the
steering wheel.
3
3
On the corresponding white
wire, make a pigtail connection.
5
3
Pass it towards the radio
housing.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Finding an ACC wire
207
Find position 1 using a
multimeter, check the presence
of +12V after ignition.
Or use a jumper to connect a
wire.
Swap the RED and ORANGE
fuses. Cut the red wire between
the fuse and the ISO connector.
Connect the ACC wire.
2
10
4
6