Steering Wheel - Parrot CK3100 Series Installation Manual

EXPERT TEPEE
1
Insert the removal tools into the
slots on each side of the radio.
3
Using a plastic trim tool, unclip the
screen surround on the top of the
dashboard starting from the
bottom.
5
Using a plastic trim tool, unclip the
panel under the steering wheel
starting from the bottom.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Disassembly 1 / 2
Remove screws 1 and 2, then unclip
207
Unclip, pull and remove the radio
taking care to unplug
the connector and the antenna.
Using a plastic trim tool, unclip
and half open the air vent
surround from the top.
1
2
and half open the panel under the

steering wheel.

2
4
6