Selector Lever - Renault Master Handbook

SEQUENTIAL GEARBOX

Selector lever 1

– This allows you to shift directly from
first gear to reverse gear, to select
reverse gear and neutral and to
change gear in manual mode.
– It also allows you to switch between
manual and automatic modes at
any time, with the engine switched
on and reverse gear engaged, by
moving the lever to the left.
Note: the selector lever automatically
returns to the middle position after use.
(1/6)
1
6
Display
2 Load mode
3 Automatic mode
4 Gear display
5 Brake pedal depressed indicator
light
6 Snow mode (depending on the vehi-
cle)
The gear selected (1, 2..., 6, N, R) is
displayed on the instrument panel. In
automatic mode, (A) is displayed.
Operation
2
Switch on the ignition.
The display on the instrument panel
switches on.
If neutral (N) is displayed and is ac-
3
companied (depending on the vehicle),
by the 5 warning light; press the brake
pedal and start the engine but do not
4
accelerate.
If a gear other than neutral is engaged,
N flashes on the display accompanied
by the 5 warning light; press the brake
pedal and place the lever in position N.
5
Start the engine.
Note: do not attempt to start the engine
by pushing the vehicle if the battery is
flat (the display remains off when the ig-
nition is switched on).
2.41