Renault Master Handbook page 139

LANE DEPARTURE WARNING
With the ignition on, the function is
active by default.
Deactivating/Activating the
function
To deactivate it, press button 2. The in-
dicator light on button 2 comes on, ac-
companied by a message on the in-
strument panel "LANE DEPARTURE
WARNING OFF".
(2/2)
To activate it, press button 2.
The warning light on button 2 goes out,
accompanied by a message on the in-
strument panel "LANE DEPARTURE
WARNING ON".
The function is set to notify the
2
driver if:
– the indicator light on button 2 is off;
and
– the vehicle speed is greater than ap-
proximately 37.2 mph (60 km/h);
and
– lines are detected.
Warning light
instrument panel to notify the driver.
The function sounds the alarm if:
a line is crossed without activating the
indicator lights. The function alerts the
driver through a warning light
on the instrument panel, along with a
beep.

comes on on the

Conditions for non-activation
of alerts
– Indicators activated or having been
activated less than approximately
four seconds prior to departing from
the lane;
– Very fast lane departure;
– Driving continuously on a line;
– ...
Operating faults
In the event of a malfunction, a mes-
sage "LANE DEPARTURE CHECK" is
displayed on the instrument panel ac-
companied by the warning light
Consult an approved dealer.
©
.
2.25