Mazda mx5 Owner's Manual page 87

Hide thumbs Also See for mx5:
Table of Contents

Advertisement

NOTE
Use the following procedure to
change the setting.
1. Switch the ignition off and close
both of the doors and the boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
Both of the doors and the boot lid,
fuel-fi ller fl ap lock and the beep
sound activates at the currently
set volume. (If the beep sound is
currently set to not activate, it will
not activate.) The setting changes
each time the LOCK button on the
key is pressed and the beep sound
activates at the set volume. (If the
beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed
by doing any one of the following:
Switching the ignition to ACC
or ON.
Closing the driver's door.
Opening the boot lid.
Not operating the key for 10
seconds.
Pressing any button except the
LOCK button on the key.
Pressing a request switch.
(With theft-deterrent system)
The hazard warning lights fl ash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System on
page 3-44 .
Doors and Locks
NOTE
(With double locking system)
Pressing the request switch twice
within 3 seconds will activate the
double locking system.
Refer to Double Locking System on
page 3-13 .
The setting can be changed so that
the doors and the boot lid, fuel-fi ller
fl ap are locked automatically without
pressing the request switch.
Refer to Personalisation Features on
page 9-10 .
(Auto-lock function)
A beep sound is heard when both
doors are closed while the advanced
key is being carried. Both doors
and the boot lid, fuel-fi ller fl ap are
locked automatically after about
three seconds when the advanced
key is out of the operational range.
Also, the hazard warning lights
fl ash once. (Even if the driver is in
the operational range, both doors
and the boot lid, fuel-fi ller fl ap are
locked automatically after about
30 seconds.) If you are out of the
operational range before the doors
and the boot lid are completely
closed or another key is left in the
vehicle, the auto-lock function
will not work. Always make sure
that both doors and the boot lid are
closed and locked before leaving the
vehicle. The auto-lock function does
not close the power windows.
Before Driving
3–15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents