Mazda mx5 Owner's Manual page 242

When Driving
i-ACTIVSENSE
1. Press the MODE switch to turn the system on.
2. Press the SET
more, the speed is set to the current vehicle speed. When the current vehicle speed is less
than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
3. To increase the set speed, press the RESUME/ switch continuously. The set speed can
be adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the RESUME/ switch momentary. For example,
the set speed increases about 4 km/h (4 mph) by pressing the RESUME/ switch 4
times.
4. To decrease the set speed, press the SET
adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
speed decreases about 4 km/h (4 mph) by pressing the SET
NOTE
When the vehicle set speed is displayed in the instrument cluster, press the
RESUME/ switch to set the displayed vehicle speed.
The system is temporarily cancelled when the vehicle is accelerated by depressing the
accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the
set speed or less.
The vehicle speed may exceed the set speed on a down slope.
Temporarily Cancelling the System
The system is temporarily cancelled (stand-by status) when any of the following operations
is done while the adjustable speed limiter is displayed.
OFF/CANCEL switch is pressed
Accelerator pedal is strongly depressed
Press the RESUME/ switch to resume the operation at the previous set speed. The
adjustable speed limiter display remains displayed.
NOTE
The set speed can be set by pressing the SET switch while the system is in stand-by
status.
The adjustable speed limiter is not cancelled by depressing the brake pedal.
4–114
to set the speed. When the current vehicle speed is 30 km/h (20 mph) or
switch continuously. The set speed can be
switch momentary. For example, the set
switch 4 times.