Behringer MOTOR 61 User Manual page 28

28
MOTÖR 61 / MOTÖR 49 User Manual
11. Now press the DATA knob 6 times until "SUCCESS" is indicated.
12. Now you can press the FWD button for assigning the next fader knob, or
press BACK to exit from the menu.
13. When you have finished turning off the fader touch to all the
faders, you must now save this as a new preset. See chapter 10
for more details. If you do not save it, then your settings will be
lost as soon as you load a different preset.
Notes:
◊
If you would like to assign "Fader 24" for example, you have to press
the FADER BANK button "17-24" in step 5 above, and touch the 8th fader
"F8" in step 6 (which represents fader 24). Now (in Step 7) the display
will show "FADER TOUCH 24."
◊
If you want to remove the touch command for all 32 channel faders,
you have to repeat the above steps for each fader individually.
◊
Although there is a Global command for turning the fader touch On or
Off (GLOBAL>FADERS>TOUCH ON/OFF), this will affect both MIDI and MC
modes, so you will lose the fader touch operation in MC mode.