Mc Mode Assignment Table - Behringer MOTOR 61 User Manual

16
MOTÖR 61 / MOTÖR 49 User Manual

7. MC Mode Assignment Table

This table shows the operation of the various controls in MC mode. The silkscreened text on the MOTÖR top surface shows the standard MIDI operation, whereas some of the
assignments change when you are using MC mode, such as the Fader Bank buttons and Encoder Bank buttons.
MOTÖR
Faders 1-8
Master Fader (9)
Encoders 1-8
Pads 1-8
Transport Section (<<, >>, Stop, Play, Loop, Rec)
Sustain Pedal
Expression Pedal
Pitch Bend Wheel
Modulation Wheel
Fader Banks 1-8
Fader Banks 9-16
Fader Banks 17-24
Fader Banks 25-32
Encoder Banks 1-8
Encoder Banks 9-16
Encoder Banks 17-24
Encoder Banks 25-32
Pad Banks 1-8
Pad Banks 9-16
Pad Banks 17-24
Pad Banks 25-32
Keys + all other buttons/controls
The actual MC-Mode functions of the Fader Bank buttons and Encoder Bank buttons are shown in the drawing on the next page:
MC
Faders 1-8
Master Fader (9)
V-Pots 1-8
No MC mode assignment
(Pads keep the original assignments from the "Standard MIDI Mode")
Transport Section (<<, >>, Stop, Play, Cycle, Rec)
User Switch 1 (rear input)
External Control (rear input)
No MC Mode assignment (keeps "Pitch Bend")
No MC Mode assignment (keeps original assignment from "Standard MIDI Mode")
V-POT Assign Track
V-POT Assign Send
V-POT Assign Pan/Surround
V-POT Assign Plug-IN
V-POT Assign EQ
V-POT Assign Instrument
FADER BANKS Bank <
FADER BANKS Bank >
No MC Mode assignment (same function as in "Standard MIDI Mode")
No MC Mode assignment (same function as in "Standard MIDI Mode")
No MC Mode assignment (same function as in "Standard MIDI Mode")
No MC Mode assignment (same function as in "Standard MIDI Mode")
No MC mode assignment