Behringer MOTOR 61 User Manual page 27

27
MOTÖR 61 / MOTÖR 49 User Manual
9.3 Switching off the fader touch command in
standard MIDI mode:
Let us look at how we can edit the MIDI assignments for one specific control
event, for example, the Fader Touch event.
In case you don't want to use this function, you can re-assign the touch command
to a different MIDI command (CC), change the MIDI channel, or just switch off the
function by setting the MIDI channel to OFF. The following steps describe how
this is done based on the factory DEFAULT preset:
1. Please press the MIDI button as the OPERATION MODE.
2. Now press the GLOBAL button.
3. Now select by turning/pushing the DATA knob (push encoder):
1. MIDI > 4. CHANGE CONTROL.
4. The display now says " (WAITING ...) " as it waits for you to select a control
in the next steps:
5. Press the FADER BANK button of the fader which you would like to modify,
for example "1-8."
6. Now touch (but do not move) the desired fader, for example "F1."
7. The display will indicate "FADER TOUCH 1."
8. Press the DATA knob (push encoder) to accept and go on to the next step.
9. The display now shows "MIDI OUT: USB+MIDI" which needs no change, so
press the DATA knob.
10. The display now shows "MIDI CH" > turn the DATA knob to select "OFF" and
press the DATA knob.